SOODAR Routers

Made in Iran, Knowledge Base

High Quality, Compatible with other Routers

soodar

Very high speed

The use of high-speed VPP core has caused Soodar’s native router is capable of using 40G, 25G and 100G network cards.
This powerful router gives your network a new generation of speed, quality and features compared to other existing routers. In this router, for each CPU core, there is a routing capacity of 14 million packets per second.

Different quality tests

Quality testing is one of the areas that has been considered since the beginning of Soodar’s product,So that the quality product reaches the customer.
In this regard, a wide variety of tests are performed in the simulation environment and the real environment automatically.
These tests are performed for each change in the router. And new tests are added to the test set every day

Like Cisco

Due to the widespread use of Cisco routers, we have tried The instructions are similar to the instructions for Cisco routers. So network administrators can easily used.
Considering Soodar router protocols and features, This native router meets the needs of Cisco users And it’s a good alternative for replacement of Cisco routers.

Soodar features

Routing Protocols


Depending on the needs of your organization’s network, you can use different protocols
  • OSPFV2
  • OSPFV3
  • RIP
  • RIPng
  • IS-IS
  • BGP
  • EIGRP

IPV4


Soodar router supports all IPv4 features
Large routing tables are supported on this router and do not reduce router performance.
Soodar router supports multiple routes of the same weight or with different weights. When there are different routes for a destination, the network load is divided on these routes.

IPV6


The use of IPv6 is increasing every day and we have to prepare our networks for IPv6. The Soodvar IPv6 router is fully supported and you can plan to move towards this protocol.

QOS


In many networks, service quality support is essential. For this purpose, the quality of service has been implemented in Soodar router, and exactly according to Cisco commands, you can adjust this quality of service for different traffic.

Firewall


ACL commands, like Cisco, are fully supported. All rules are stateless and stateful.

VRF


Virtual routing is used to create multiple separate and independent routing tables on a single router.
This is used to create separate networks without the need to add new routers.

MPLS


MPLS networks were originally implemented to reduce processing costs at the core of large networks. MPLS is also supported on Soodar routers. The LDP protocol can also be used to distribute MPLS tags. The VPLS tunnel is also supported on the Soodar router.

Layer 2


Although the Soodar router is a product for routing, some of the features of Layer 2 are also provided in this product, such as
  • Bridge
  • VLAN
  • VLAN trunk
  • Split-horizon group

GRE


The GRE 3-layer tunnel can be used to create special channels for network traffic. These tunnels are fully supported in Soodar routers

VXLAN


You can use this protocol to tunnel the Layer 2 networks and pass various VLANs through your network. This protocol is supported on Soodar routers.

Monitoring


You can use prometheus to monitor Soodar routers. In Soodar, all system parameters and errors occurred are presented. There is also a dedicated monitoring product for this product

Troubleshoot


To troubleshoot the network, various protocols are supported in Soodar routers.
  • SPAN Port
  • LLDP
  • CDP
  • Protocol Logs
  • Centralized Syslog

configuration


Workshop For SCRIPT

Workshop For OSPF

Workshop For BGP

Workshop For RIP

Workshop For EIGRP

Workshop For IS-IS

Workshop For OSPF6

Workshop For RIPng

Workshop For MPLS

Workshop For VPLS

Workshop For VRF

Workshop For NAT

Workshop For VXLAN

Workshop For GRE

Workshop For IPSEC

Workshop For QOS

Workshop For ACL

Workshop For VLAN

Workshop For BRIDGE

Workshop For SPAN

Workshop For SYSLOG

Workshop For BUNDLE

Workshop For DEBUG

Workshop For UPDATE

Workshop For SYSTEM

Workshop For SNMP